Lemokey P1 HE Setup: Magnetic Switch and Actuation Tips
By Keychron | Custom Mechanical Keyboards for Mac, Windows ... | Published: 2026-11-01
Category: How-to Guides
Set up the Lemokey P1 HE for gaming: pair wirelessly, tune actuation points, configure rapid trigger, and avoid the most common magnetic-switch mistakes.
Quick answer
Set up the Lemokey P1 HE by pairing it wirelessly first, then adjusting actuation points per key in Lemokey's configuration software, and only then enabling rapid trigger. Keep the stock Gateron double-rail magnetic switches, because the board does not support other magnetic switches.
Why the P1 HE feels different from a standard mechanical keyboard
Magnetic switches do not close a metal contact at a fixed point. Instead, the keyboard reads how far the stem has traveled, so you can set each key to register earlier or later. That is the core of a magnetic switch keyboard guide: the switch is only half the story, and the configuration software does the rest.
The practical benefit is per-key control. You can make movement keys respond almost immediately while keeping typing keys at a safer, deeper point to avoid accidental presses. The trade-off is that a careless profile can make the board feel twitchy or cause missed inputs, so change one setting at a time.
What the P1 HE supports, and what it does not
The P1 HE is built around Gateron double-rail magnetic switches and is compatible exclusively with that switch type. It does not support other magnetic switches such as Gateron Magnetic Jade or Gateron KS-20. If you plan to swap switches later, treat that as a hard limit rather than a preference.
The fully assembled version includes the PCB, case, aluminum plate, and keycaps, so you can start tuning as soon as it arrives. If you buy a different option type, check what is included before planning your build.
Lemokey P1 HE setup steps
- Pair the keyboard wirelessly before tuning: Charge the P1 HE, then connect it in wireless mode using the pairing method for your platform. Confirm that every key registers in a simple text editor before opening any configuration tool. If a key does not register during this check, fix the connection before changing actuation settings.
- Install the configuration software and confirm the board is detected: Download the Lemokey configuration software for your operating system and connect the keyboard. Wait until the software shows the P1 HE as the active device rather than a generic keyboard. A board that appears as a generic keyboard usually means the cable or wireless connection is the problem, not the switches.
- Set a baseline actuation point for typing: Start with a moderate actuation point across all keys and type a few paragraphs. Adjust the whole board up or down before you touch individual keys, so you have a reference feel. Change one global setting at a time and retest; stacking changes makes it hard to know what caused a missed or doubled input.
- Lower actuation only on keys that need speed: For gaming, set movement and ability keys to a shallower actuation point while leaving chat and menu keys deeper. Test each change in the actual game or app you play. If you get accidental presses while resting your fingers, raise that key's actuation point instead of removing the setting.
- Enable rapid trigger after actuation is stable: Turn on rapid trigger only once your actuation points feel right. Rapid trigger resets the key as soon as it moves upward, so it amplifies an overly shallow actuation point into chatter. Disable rapid trigger temporarily if you need to isolate whether a double press comes from the setting or from the switch.
- Save separate profiles for typing and gaming: Store one profile with conservative actuation for everyday typing and another with shallow actuation and rapid trigger for games. Switch profiles rather than re-tuning before each session. Name the profiles clearly; an unnamed profile is easy to overwrite during the next tuning session.
- Recheck after any switch or keycap change: If you reseat switches or change keycaps, rerun the key check and confirm actuation points still behave as expected. Magnetic switches depend on consistent stem travel, so a partially seated switch can skew readings. Keep the stock double-rail magnetic switches; the board does not support other magnetic switch types.
Product facts
- Lemokey P1 HE Wireless Magnetic Switch Custom Gaming Keyboard: The P1 HE uses adjustable-actuation-point Gateron double-rail magnetic switches and is compatible exclusively with that switch type. You can tune each key's actuation point, but you cannot drop in other magnetic switches such as Gateron Magnetic Jade or KS-20.
Lemokey P1 HE Wireless Magnetic Switch Custom Gaming Keyboard
